1150 lines
31 KiB
C
1150 lines
31 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* File Name : stm32f4xx_hal_msp.c
|
|
* Description : This file provides code for the MSP Initialization
|
|
* and de-Initialization codes.
|
|
******************************************************************************
|
|
** This notice applies to any and all portions of this file
|
|
* that are not between comment pairs USER CODE BEGIN and
|
|
* USER CODE END. Other portions of this file, whether
|
|
* inserted by the user or by software development tools
|
|
* are owned by their respective copyright owners.
|
|
*
|
|
* COPYRIGHT(c) 2018 STMicroelectronics
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
/* USER CODE BEGIN Includes */
|
|
|
|
/* USER CODE END Includes */
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* USER CODE BEGIN TD */
|
|
|
|
/* USER CODE END TD */
|
|
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* USER CODE BEGIN Define */
|
|
|
|
/* USER CODE END Define */
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* USER CODE BEGIN Macro */
|
|
|
|
/* USER CODE END Macro */
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* USER CODE BEGIN PV */
|
|
|
|
/* USER CODE END PV */
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* USER CODE BEGIN PFP */
|
|
|
|
/* USER CODE END PFP */
|
|
|
|
/* External functions --------------------------------------------------------*/
|
|
/* USER CODE BEGIN ExternalFunctions */
|
|
|
|
/* USER CODE END ExternalFunctions */
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
|
/**
|
|
* Initializes the Global MSP.
|
|
*/
|
|
void HAL_MspInit(void)
|
|
{
|
|
/* USER CODE BEGIN MspInit 0 */
|
|
|
|
/* USER CODE END MspInit 0 */
|
|
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* System interrupt init*/
|
|
|
|
/* USER CODE BEGIN MspInit 1 */
|
|
|
|
/* USER CODE END MspInit 1 */
|
|
}
|
|
|
|
/**
|
|
* @brief DAC MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param hdac: DAC handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(hdac->Instance==DAC)
|
|
{
|
|
/* USER CODE BEGIN DAC_MspInit 0 */
|
|
|
|
/* USER CODE END DAC_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_DAC_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**DAC GPIO Configuration
|
|
PA4 ------> DAC_OUT1
|
|
PA5 ------> DAC_OUT2
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN DAC_MspInit 1 */
|
|
|
|
/* USER CODE END DAC_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief DAC MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param hdac: DAC handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
|
|
{
|
|
if(hdac->Instance==DAC)
|
|
{
|
|
/* USER CODE BEGIN DAC_MspDeInit 0 */
|
|
|
|
/* USER CODE END DAC_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_DAC_CLK_DISABLE();
|
|
|
|
/**DAC GPIO Configuration
|
|
PA4 ------> DAC_OUT1
|
|
PA5 ------> DAC_OUT2
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4|GPIO_PIN_5);
|
|
|
|
/* USER CODE BEGIN DAC_MspDeInit 1 */
|
|
|
|
/* USER CODE END DAC_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief ETH MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param heth: ETH handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(heth->Instance==ETH)
|
|
{
|
|
/* USER CODE BEGIN ETH_MspInit 0 */
|
|
|
|
/* USER CODE END ETH_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_ETH_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
__HAL_RCC_GPIOG_CLK_ENABLE();
|
|
/**ETH GPIO Configuration
|
|
PC1 ------> ETH_MDC
|
|
PA1 ------> ETH_REF_CLK
|
|
PA2 ------> ETH_MDIO
|
|
PA7 ------> ETH_CRS_DV
|
|
PC4 ------> ETH_RXD0
|
|
PC5 ------> ETH_RXD1
|
|
PG11 ------> ETH_TX_EN
|
|
PG13 ------> ETH_TXD0
|
|
PG14 ------> ETH_TXD1
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_13|GPIO_PIN_14;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
|
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN ETH_MspInit 1 */
|
|
|
|
/* USER CODE END ETH_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief ETH MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param heth: ETH handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
|
|
{
|
|
if(heth->Instance==ETH)
|
|
{
|
|
/* USER CODE BEGIN ETH_MspDeInit 0 */
|
|
|
|
/* USER CODE END ETH_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_ETH_CLK_DISABLE();
|
|
|
|
/**ETH GPIO Configuration
|
|
PC1 ------> ETH_MDC
|
|
PA1 ------> ETH_REF_CLK
|
|
PA2 ------> ETH_MDIO
|
|
PA7 ------> ETH_CRS_DV
|
|
PC4 ------> ETH_RXD0
|
|
PC5 ------> ETH_RXD1
|
|
PG11 ------> ETH_TX_EN
|
|
PG13 ------> ETH_TXD0
|
|
PG14 ------> ETH_TXD1
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
|
|
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7);
|
|
|
|
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_11|GPIO_PIN_13|GPIO_PIN_14);
|
|
|
|
/* USER CODE BEGIN ETH_MspDeInit 1 */
|
|
|
|
/* USER CODE END ETH_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief RTC MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param hrtc: RTC handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
|
|
{
|
|
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
|
if(hrtc->Instance==RTC)
|
|
{
|
|
/* USER CODE BEGIN RTC_MspInit 0 */
|
|
|
|
/* USER CODE END RTC_MspInit 0 */
|
|
|
|
/** Initializes the peripherals clock
|
|
*/
|
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
|
|
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
|
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_RTC_ENABLE();
|
|
/* USER CODE BEGIN RTC_MspInit 1 */
|
|
|
|
/* USER CODE END RTC_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief RTC MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param hrtc: RTC handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
|
|
{
|
|
if(hrtc->Instance==RTC)
|
|
{
|
|
/* USER CODE BEGIN RTC_MspDeInit 0 */
|
|
|
|
/* USER CODE END RTC_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_RTC_DISABLE();
|
|
/* USER CODE BEGIN RTC_MspDeInit 1 */
|
|
|
|
/* USER CODE END RTC_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief SD MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param hsd: SD handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(hsd->Instance==SDIO)
|
|
{
|
|
/* USER CODE BEGIN SDIO_MspInit 0 */
|
|
|
|
/* USER CODE END SDIO_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_SDIO_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
|
/**SDIO GPIO Configuration
|
|
PC8 ------> SDIO_D0
|
|
PC9 ------> SDIO_D1
|
|
PC10 ------> SDIO_D2
|
|
PC11 ------> SDIO_D3
|
|
PC12 ------> SDIO_CK
|
|
PD2 ------> SDIO_CMD
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|
|
|GPIO_PIN_12;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN SDIO_MspInit 1 */
|
|
|
|
/* USER CODE END SDIO_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief SD MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param hsd: SD handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
|
|
{
|
|
if(hsd->Instance==SDIO)
|
|
{
|
|
/* USER CODE BEGIN SDIO_MspDeInit 0 */
|
|
|
|
/* USER CODE END SDIO_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_SDIO_CLK_DISABLE();
|
|
|
|
/**SDIO GPIO Configuration
|
|
PC8 ------> SDIO_D0
|
|
PC9 ------> SDIO_D1
|
|
PC10 ------> SDIO_D2
|
|
PC11 ------> SDIO_D3
|
|
PC12 ------> SDIO_CK
|
|
PD2 ------> SDIO_CMD
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|
|
|GPIO_PIN_12);
|
|
|
|
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
|
|
|
|
/* USER CODE BEGIN SDIO_MspDeInit 1 */
|
|
|
|
/* USER CODE END SDIO_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief SPI MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param hspi: SPI handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(hspi->Instance==SPI1)
|
|
{
|
|
/* USER CODE BEGIN SPI1_MspInit 0 */
|
|
|
|
/* USER CODE END SPI1_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_SPI1_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**SPI1 GPIO Configuration
|
|
PB3 ------> SPI1_SCK
|
|
PB4 ------> SPI1_MISO
|
|
PB5 ------> SPI1_MOSI
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* SPI1 interrupt Init */
|
|
HAL_NVIC_SetPriority(SPI1_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(SPI1_IRQn);
|
|
/* USER CODE BEGIN SPI1_MspInit 1 */
|
|
|
|
/* USER CODE END SPI1_MspInit 1 */
|
|
}
|
|
else if(hspi->Instance==SPI2)
|
|
{
|
|
/* USER CODE BEGIN SPI2_MspInit 0 */
|
|
|
|
/* USER CODE END SPI2_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_SPI2_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**SPI2 GPIO Configuration
|
|
PC2 ------> SPI2_MISO
|
|
PC3 ------> SPI2_MOSI
|
|
PB13 ------> SPI2_SCK
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_13;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN SPI2_MspInit 1 */
|
|
|
|
/* USER CODE END SPI2_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief SPI MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param hspi: SPI handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
|
{
|
|
if(hspi->Instance==SPI1)
|
|
{
|
|
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
|
|
|
/* USER CODE END SPI1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_SPI1_CLK_DISABLE();
|
|
|
|
/**SPI1 GPIO Configuration
|
|
PB3 ------> SPI1_SCK
|
|
PB4 ------> SPI1_MISO
|
|
PB5 ------> SPI1_MOSI
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5);
|
|
|
|
/* SPI1 interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(SPI1_IRQn);
|
|
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
|
|
|
/* USER CODE END SPI1_MspDeInit 1 */
|
|
}
|
|
else if(hspi->Instance==SPI2)
|
|
{
|
|
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
|
|
|
/* USER CODE END SPI2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_SPI2_CLK_DISABLE();
|
|
|
|
/**SPI2 GPIO Configuration
|
|
PC2 ------> SPI2_MISO
|
|
PC3 ------> SPI2_MOSI
|
|
PB13 ------> SPI2_SCK
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|GPIO_PIN_3);
|
|
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
|
|
|
|
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
|
|
|
/* USER CODE END SPI2_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief TIM_Base MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param htim_base: TIM_Base handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
|
{
|
|
if(htim_base->Instance==TIM2)
|
|
{
|
|
/* USER CODE BEGIN TIM2_MspInit 0 */
|
|
|
|
/* USER CODE END TIM2_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_TIM2_CLK_ENABLE();
|
|
/* USER CODE BEGIN TIM2_MspInit 1 */
|
|
|
|
/* USER CODE END TIM2_MspInit 1 */
|
|
}
|
|
else if(htim_base->Instance==TIM11)
|
|
{
|
|
/* USER CODE BEGIN TIM11_MspInit 0 */
|
|
|
|
/* USER CODE END TIM11_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_TIM11_CLK_ENABLE();
|
|
/* USER CODE BEGIN TIM11_MspInit 1 */
|
|
|
|
/* USER CODE END TIM11_MspInit 1 */
|
|
}
|
|
else if(htim_base->Instance==TIM13)
|
|
{
|
|
/* USER CODE BEGIN TIM13_MspInit 0 */
|
|
|
|
/* USER CODE END TIM13_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_TIM13_CLK_ENABLE();
|
|
/* USER CODE BEGIN TIM13_MspInit 1 */
|
|
|
|
/* USER CODE END TIM13_MspInit 1 */
|
|
}
|
|
else if(htim_base->Instance==TIM14)
|
|
{
|
|
/* USER CODE BEGIN TIM14_MspInit 0 */
|
|
|
|
/* USER CODE END TIM14_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_TIM14_CLK_ENABLE();
|
|
/* USER CODE BEGIN TIM14_MspInit 1 */
|
|
|
|
/* USER CODE END TIM14_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief TIM_Encoder MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param htim_encoder: TIM_Encoder handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef* htim_encoder)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(htim_encoder->Instance==TIM4)
|
|
{
|
|
/* USER CODE BEGIN TIM4_MspInit 0 */
|
|
|
|
/* USER CODE END TIM4_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_TIM4_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**TIM4 GPIO Configuration
|
|
PB6 ------> TIM4_CH1
|
|
PB7 ------> TIM4_CH2
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN TIM4_MspInit 1 */
|
|
|
|
/* USER CODE END TIM4_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(htim->Instance==TIM2)
|
|
{
|
|
/* USER CODE BEGIN TIM2_MspPostInit 0 */
|
|
|
|
/* USER CODE END TIM2_MspPostInit 0 */
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**TIM2 GPIO Configuration
|
|
PA3 ------> TIM2_CH4
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN TIM2_MspPostInit 1 */
|
|
|
|
/* USER CODE END TIM2_MspPostInit 1 */
|
|
}
|
|
|
|
}
|
|
/**
|
|
* @brief TIM_Base MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param htim_base: TIM_Base handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
|
{
|
|
if(htim_base->Instance==TIM2)
|
|
{
|
|
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
|
|
|
/* USER CODE END TIM2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_TIM2_CLK_DISABLE();
|
|
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
|
|
|
/* USER CODE END TIM2_MspDeInit 1 */
|
|
}
|
|
else if(htim_base->Instance==TIM11)
|
|
{
|
|
/* USER CODE BEGIN TIM11_MspDeInit 0 */
|
|
|
|
/* USER CODE END TIM11_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_TIM11_CLK_DISABLE();
|
|
/* USER CODE BEGIN TIM11_MspDeInit 1 */
|
|
|
|
/* USER CODE END TIM11_MspDeInit 1 */
|
|
}
|
|
else if(htim_base->Instance==TIM13)
|
|
{
|
|
/* USER CODE BEGIN TIM13_MspDeInit 0 */
|
|
|
|
/* USER CODE END TIM13_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_TIM13_CLK_DISABLE();
|
|
/* USER CODE BEGIN TIM13_MspDeInit 1 */
|
|
|
|
/* USER CODE END TIM13_MspDeInit 1 */
|
|
}
|
|
else if(htim_base->Instance==TIM14)
|
|
{
|
|
/* USER CODE BEGIN TIM14_MspDeInit 0 */
|
|
|
|
/* USER CODE END TIM14_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_TIM14_CLK_DISABLE();
|
|
/* USER CODE BEGIN TIM14_MspDeInit 1 */
|
|
|
|
/* USER CODE END TIM14_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief TIM_Encoder MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param htim_encoder: TIM_Encoder handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef* htim_encoder)
|
|
{
|
|
if(htim_encoder->Instance==TIM4)
|
|
{
|
|
/* USER CODE BEGIN TIM4_MspDeInit 0 */
|
|
|
|
/* USER CODE END TIM4_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_TIM4_CLK_DISABLE();
|
|
|
|
/**TIM4 GPIO Configuration
|
|
PB6 ------> TIM4_CH1
|
|
PB7 ------> TIM4_CH2
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
|
|
|
|
/* USER CODE BEGIN TIM4_MspDeInit 1 */
|
|
|
|
/* USER CODE END TIM4_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief UART MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param huart: UART handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(huart->Instance==USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
|
|
|
/* USER CODE END USART1_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART1_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USART1 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(USART1_IRQn);
|
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
|
|
|
/* USER CODE END USART1_MspInit 1 */
|
|
}
|
|
else if(huart->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
|
|
|
/* USER CODE END USART3_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART3_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**USART3 GPIO Configuration
|
|
PB10 ------> USART3_TX
|
|
PB11 ------> USART3_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN USART3_MspInit 1 */
|
|
|
|
/* USER CODE END USART3_MspInit 1 */
|
|
}
|
|
else if(huart->Instance==USART6)
|
|
{
|
|
/* USER CODE BEGIN USART6_MspInit 0 */
|
|
|
|
/* USER CODE END USART6_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART6_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
/**USART6 GPIO Configuration
|
|
PC6 ------> USART6_TX
|
|
PC7 ------> USART6_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF8_USART6;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN USART6_MspInit 1 */
|
|
|
|
/* USER CODE END USART6_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief UART MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param huart: UART handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|
{
|
|
if(huart->Instance==USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART1_CLK_DISABLE();
|
|
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
|
|
|
/* USART1 interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(USART1_IRQn);
|
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART1_MspDeInit 1 */
|
|
}
|
|
else if(huart->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART3_CLK_DISABLE();
|
|
|
|
/**USART3 GPIO Configuration
|
|
PB10 ------> USART3_TX
|
|
PB11 ------> USART3_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
|
|
|
|
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 1 */
|
|
}
|
|
else if(huart->Instance==USART6)
|
|
{
|
|
/* USER CODE BEGIN USART6_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART6_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART6_CLK_DISABLE();
|
|
|
|
/**USART6 GPIO Configuration
|
|
PC6 ------> USART6_TX
|
|
PC7 ------> USART6_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6|GPIO_PIN_7);
|
|
|
|
/* USER CODE BEGIN USART6_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART6_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief PCD MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param hpcd: PCD handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(hpcd->Instance==USB_OTG_FS)
|
|
{
|
|
/* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspInit 0 */
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USB_OTG_FS GPIO Configuration
|
|
PA11 ------> USB_OTG_FS_DM
|
|
PA12 ------> USB_OTG_FS_DP
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
|
/* USB_OTG_FS interrupt Init */
|
|
HAL_NVIC_SetPriority(OTG_FS_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
|
|
/* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief PCD MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param hpcd: PCD handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
|
|
{
|
|
if(hpcd->Instance==USB_OTG_FS)
|
|
{
|
|
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
|
|
|
|
/**USB_OTG_FS GPIO Configuration
|
|
PA11 ------> USB_OTG_FS_DM
|
|
PA12 ------> USB_OTG_FS_DP
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
|
|
|
|
/* USB_OTG_FS interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
|
|
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
static uint32_t FSMC_Initialized = 0;
|
|
|
|
static void HAL_FSMC_MspInit(void){
|
|
/* USER CODE BEGIN FSMC_MspInit 0 */
|
|
|
|
/* USER CODE END FSMC_MspInit 0 */
|
|
GPIO_InitTypeDef GPIO_InitStruct ={0};
|
|
if (FSMC_Initialized) {
|
|
return;
|
|
}
|
|
FSMC_Initialized = 1;
|
|
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_FSMC_CLK_ENABLE();
|
|
|
|
/** FSMC GPIO Configuration
|
|
PF0 ------> FSMC_A0
|
|
PF1 ------> FSMC_A1
|
|
PF2 ------> FSMC_A2
|
|
PF3 ------> FSMC_A3
|
|
PF4 ------> FSMC_A4
|
|
PF5 ------> FSMC_A5
|
|
PF12 ------> FSMC_A6
|
|
PF13 ------> FSMC_A7
|
|
PF14 ------> FSMC_A8
|
|
PF15 ------> FSMC_A9
|
|
PG0 ------> FSMC_A10
|
|
PG1 ------> FSMC_A11
|
|
PE7 ------> FSMC_D4
|
|
PE8 ------> FSMC_D5
|
|
PE9 ------> FSMC_D6
|
|
PE10 ------> FSMC_D7
|
|
PE11 ------> FSMC_D8
|
|
PE12 ------> FSMC_D9
|
|
PE13 ------> FSMC_D10
|
|
PE14 ------> FSMC_D11
|
|
PE15 ------> FSMC_D12
|
|
PD8 ------> FSMC_D13
|
|
PD9 ------> FSMC_D14
|
|
PD10 ------> FSMC_D15
|
|
PD11 ------> FSMC_A16
|
|
PD12 ------> FSMC_A17
|
|
PD13 ------> FSMC_A18
|
|
PD14 ------> FSMC_D0
|
|
PD15 ------> FSMC_D1
|
|
PG2 ------> FSMC_A12
|
|
PG3 ------> FSMC_A13
|
|
PG4 ------> FSMC_A14
|
|
PG5 ------> FSMC_A15
|
|
PD0 ------> FSMC_D2
|
|
PD1 ------> FSMC_D3
|
|
PD4 ------> FSMC_NOE
|
|
PD5 ------> FSMC_NWE
|
|
PG10 ------> FSMC_NE3
|
|
PE0 ------> FSMC_NBL0
|
|
PE1 ------> FSMC_NBL1
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|
|
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13
|
|
|GPIO_PIN_14|GPIO_PIN_15;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
|
|
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|
|
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
|
|
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
|
|
|GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
|
|
|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
|
|
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|
|
|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15
|
|
|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN FSMC_MspInit 1 */
|
|
|
|
/* USER CODE END FSMC_MspInit 1 */
|
|
}
|
|
|
|
void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){
|
|
/* USER CODE BEGIN SRAM_MspInit 0 */
|
|
|
|
/* USER CODE END SRAM_MspInit 0 */
|
|
HAL_FSMC_MspInit();
|
|
/* USER CODE BEGIN SRAM_MspInit 1 */
|
|
|
|
/* USER CODE END SRAM_MspInit 1 */
|
|
}
|
|
|
|
static uint32_t FSMC_DeInitialized = 0;
|
|
|
|
static void HAL_FSMC_MspDeInit(void){
|
|
/* USER CODE BEGIN FSMC_MspDeInit 0 */
|
|
|
|
/* USER CODE END FSMC_MspDeInit 0 */
|
|
if (FSMC_DeInitialized) {
|
|
return;
|
|
}
|
|
FSMC_DeInitialized = 1;
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_FSMC_CLK_DISABLE();
|
|
|
|
/** FSMC GPIO Configuration
|
|
PF0 ------> FSMC_A0
|
|
PF1 ------> FSMC_A1
|
|
PF2 ------> FSMC_A2
|
|
PF3 ------> FSMC_A3
|
|
PF4 ------> FSMC_A4
|
|
PF5 ------> FSMC_A5
|
|
PF12 ------> FSMC_A6
|
|
PF13 ------> FSMC_A7
|
|
PF14 ------> FSMC_A8
|
|
PF15 ------> FSMC_A9
|
|
PG0 ------> FSMC_A10
|
|
PG1 ------> FSMC_A11
|
|
PE7 ------> FSMC_D4
|
|
PE8 ------> FSMC_D5
|
|
PE9 ------> FSMC_D6
|
|
PE10 ------> FSMC_D7
|
|
PE11 ------> FSMC_D8
|
|
PE12 ------> FSMC_D9
|
|
PE13 ------> FSMC_D10
|
|
PE14 ------> FSMC_D11
|
|
PE15 ------> FSMC_D12
|
|
PD8 ------> FSMC_D13
|
|
PD9 ------> FSMC_D14
|
|
PD10 ------> FSMC_D15
|
|
PD11 ------> FSMC_A16
|
|
PD12 ------> FSMC_A17
|
|
PD13 ------> FSMC_A18
|
|
PD14 ------> FSMC_D0
|
|
PD15 ------> FSMC_D1
|
|
PG2 ------> FSMC_A12
|
|
PG3 ------> FSMC_A13
|
|
PG4 ------> FSMC_A14
|
|
PG5 ------> FSMC_A15
|
|
PD0 ------> FSMC_D2
|
|
PD1 ------> FSMC_D3
|
|
PD4 ------> FSMC_NOE
|
|
PD5 ------> FSMC_NWE
|
|
PG10 ------> FSMC_NE3
|
|
PE0 ------> FSMC_NBL0
|
|
PE1 ------> FSMC_NBL1
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|
|
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13
|
|
|GPIO_PIN_14|GPIO_PIN_15);
|
|
|
|
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|
|
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_10);
|
|
|
|
HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
|
|
|GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
|
|
|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
|
|
|
|
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
|
|
|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15
|
|
|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
|
|
|
|
/* USER CODE BEGIN FSMC_MspDeInit 1 */
|
|
|
|
/* USER CODE END FSMC_MspDeInit 1 */
|
|
}
|
|
|
|
void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram){
|
|
/* USER CODE BEGIN SRAM_MspDeInit 0 */
|
|
|
|
/* USER CODE END SRAM_MspDeInit 0 */
|
|
HAL_FSMC_MspDeInit();
|
|
/* USER CODE BEGIN SRAM_MspDeInit 1 */
|
|
|
|
/* USER CODE END SRAM_MspDeInit 1 */
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|